**Selling my Creative Soundblaster Audigy 4 Pro . Got it from U.S and now 6 months after I have got it, I realise that i dont use most of the features of “pro” part of it. You can convert your PC into a complete media center using this soundcard and you can control the song tracks, movies, pictures ****etc **on the harddisk with the remote provided. Selling it for 8k. If willing, i will give away my 4.1 speakers for 1k to bangalore buyers (obviously cant ship the speakers). You can check more about the soundcard here and more about speakers here . The speakers will not be sold individually
SPECIFICATIONS
Audigy 4 Pro Processor
-
Advanced hardware accelerated digital effects processing
-
32-bit digital processing, which maintains a theoretical 192 dB of dynamic range
-
Patented 8-point interpolation that reduces distortion to inaudible levels
-
64-voice hardware wavetable synthesizer
-
Professional quality digital mixing and equalization
High Definition Audio Quality for Playback and Recording
-
-
Playback of 64 audio channels, each at an arbitrary sample rate
-
24-bit Analog-to-Digital conversion of analog inputs at 96 kHz sample rate
-
24-bit Digital-to-Analog conversion of digital sources at 96 kHz to analog 7.1 speaker output
-
24-bit Digital-to-Analog conversion of stereo digital sources at 192 kHz to stereo output
-
16-bit to 24-bit recording sampling rates: 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96 kHz.
-
-
Supports Sony/Philips Digital Interface (SPDIF) format of up to 24-bit/96 kHz quality. Selectable sampling rate of 44.1, 48 or 96 kHz
- Low latency multitrack recording with ASIO 2.0 support at 16-bit, 48 kHz and 24-bit, 96 kHz resolution.
*(Latency performance may vary based on system configuration)
FireWire® (IEEE® 1394) Connectivity
-
Compliant with IEEE 1394a specification
-
Supports data rates of 100, 200, and 400 Mbps
-
Supports up to 63 FireWire (IEEE 1394) compatible devices in a daisy-chain configuration
-
Supplies up to 3 Watts to FireWire (IEEE 1394) compatible devices
Sound Blaster Audigy 4 Pro On-Board Connectors
-
-
Line level out (Front / Side / Rear / Center / Subwoofer)
-
Digital CD Audio in
-
Aux Audio in
-
AD_Link 1 and AD_Link 2 connectors to connect with external I/O hub.
-
Power connector
Sound Blaster Audigy 4 Pro External I/O Hub Front / Rear Panel Connectors
-
-
Headphone Out (1/4" Stereo Jack)
-
Line In 1 (1/4" Stereo Jack , shared with Mic In with Gain Control)
-
Line In 2 (1/4" Stereo Jack)
-
Line In 3 (2x RCA Jack)
-
Optical SPDIF In/Out
-
Coaxial SPDIF In/Out
-
Digital Out for 5.1 support (6-channel SPDIF Output to Creative digital speakers)
-
2x FireWire® (IEEE® 1394) ports
-
MIDI In / Out
-
Infra-red Receiver to communicate with Remote Control
-
AD_Link 1 and AD_Link 2 connectors to connect with Audigy 4 Pro
Audio Performance:
-
Signal-to-Noise Ratio (AES17, A-Weighted)
Output Voltage @ 2Vrms
Stereo Output 113dB
Front and Rear Channels 113dB
Center, Subwoofer and Side Channels 113dB
Total Harmonic Distortion + Noise at 1kHz (AES17) = 0.003% (2V Rated Output) Frequency Response +/-3dB: 10Hz to 46kHz
Works with the Following Standards:
-
Windows® XP and 2K
-
Sound Blaster MIDI and General MIDI
-
Plug and Play
-
Sound Blaster PCI
-
EAX, EAX ADVANCED HD
-
Microsoft® DirectSound® , DirectSound 3D & derivatives
-
OpenALâ„¢
-
PCI 2.3 compliant
-
AC '97
-
Dolby Digital
-
Dolby Digital EX
-
DTS Digital Surround®
-
DTS-ES Surroundâ„¢
-
Meridian Lossless Packing
-
ASIO 2.0
-
SoundFont 2.1
-
DVD-Audio
-
Windows Media® Audio 9
-